CNMC-500L Polyurea Spray Machine
Hydraulic Polyurea Spray Machine – 18KW, 35MPa, 150m Hose Support:
- 18KW Total Power 6KW per side heater, 90°C max temperature.
- 2-24kg/min Output 35MPa max pressure, 1:1 ratio.
- 150m Hose Support Individual heated hose with 1000W/15m.
- Hydraulic Drive & CPU Control Precise, reliable performance.
CNMC-500L Polyurea Spray Machine – Hydraulically Driven, 18KW, 35MPa
The CNMC-500L polyurea spray machine is a hydraulically driven proportioning unit designed for polyurea, polyurethane foam, and two-component systems requiring precise control over temperature, pressure, and mixing ratio. This hydraulic polyurea machine delivers reliable, repeatable results for industrial coating projects.
🔥 Primary Heating System – 18KW Total Power
The primary heating system consists of two independent 6KW block heaters (18KW total). This high-performance heating system achieves a DT of 50°C and reaches application temperatures of 90°C in normal conditions. All control and safety features ensure accurate, reliable performance from this polyurea spray equipment.
🔌 Independent Hose Heating – Up to 150 Meters
Equipped with two 4000W isolation transformers, the CNMC-500L spray machine allows individual heating of each component hose up to 150 meters. The heated hose features a copper resistance element homogeneously spread around the hose – eliminating cold spots and heat concentration issues found in traditional hoses.
⚙️ Double Acting Piston Proportioning Pumps
Each pump is driven by a hydraulic cylinder to deliver precise component volume. This positive-displacement design delivers constant output and stabilized pressures while eliminating asymmetrical loads. The result: extended pump seal life and consistent 1:1 ratio. Multiple pump sizes are available for different pressure and ratio requirements.
🔄 Recirculation System – Automatic Pre-Heating
The automatic recirculation system heats materials without starting the main pumps, significantly reducing polyurea spray machine setup time. Program time intervals and desired temperatures – the machine handles the rest automatically. Valves can be activated manually or automatically.
🧠 Central Processing Unit (CPU) – Real-Time Control
The CPU processes and monitors all polyurea sprayer parameters in real-time. Any deviation is corrected automatically while the unit continues operating. If a problem exceeds tolerance limits, the CPU shuts down the system and displays the specific failure type – protecting your equipment and materials.
📋 CNMC-500L Polyurea Spray Machine – Key Specifications
- Power source: 230V 3 phase / 400V 3 phase, 50/60HZ
- Total power: 18KW
- Heater power: 6KW per side
- Heating hose power: 1000W per 15 meters
- Drive mode: Hydraulic
- Air source: 0.5-0.8MPa ≥0.25m³
- Chemical output: 2-24 kg/min
- Max output pressure: 35MPa
- Mixing ratio: 1:1 (A:B)
- Max hose length: 150 meters
- Machine size: 1000 × 750 × 1150 mm
🏭 Applications for This High-Pressure Polyurea Sprayer
The CNMC-500L polyurea spray machine is ideal for:
- Polyurea coatings – bridge decks, tanks, secondary containment
- Polyurethane foam insulation – commercial and industrial buildings
- Two-component systems – requiring precise temperature and pressure control
CNMC-500L Polyurea Spray Machine — Technical Specifications
| CNMC-500L — Parameter Table | |
|---|---|
Power & Performance |
|
| Power source | 230V 3 phase, 400V 3 phase, 50/60HZ |
| Whole power | 18KW |
| Heater power | 6KW each side |
| Heating hose power | 1000W per 15 meters |
| Driven mode | Hydraulic |
| Air source requirement | 0.5-0.8MPa ≥0.25m³ |
| Chemical output | 2-24 kg/min |
| Maximum output pressure | 35MPa |
| A and B chemical output ratio | 1:1 |
| Max hose support | 150 meters |
Dimensions |
|
| Machine size | 1000 × 750 × 1150 mm |
Related Products
